嘿伙计们欢迎回来。
Hey guys welcome back.

我们将努力建立我们的通讯，以便我们可以通过我们的程序将这个东西放到网上。
We are going to work up setting up our communications so we can get this thing online with our program.

当我们来到这里进行沟通时，我们可以做各种不同的选择，我们可以做 OPC，甚至可以做 OPEC。
When we come in here to communications there are all kinds of different options we can do Deedy we can do OPC and even for OPEC.

这里几乎有所有可以想象到的格式，所以几乎没有什么是这个东西无法通信的。
There's about every format imaginable here so there's very little that this thing couldn't communicate with.

当我说得很少时，我可能什么也没说。
And when I say very little I mean probably nothing.

但在我们的例子中，我们将尝试直接与仿真进行通信。
But in our case we're going to try to communicate directly with emulate.

那么让我们继续讨论驱动程序。
So let's go ahead and go into drivers.

我们需要右键单击它，然后选择“添加删除驱动程序”，当我们这样做时，我们就会得到一份列表。
We need to right click that and then select Add Remove drivers and when we do we've got one heck of a list.

我的意思是你认为你过去见过大名单。
I mean you thought you've seen big lists in the past.

这是一个更大的。
This is a bigger one.

所以我们可以在这里交流各种不同的事物。
So there are all kinds of different things that we can communicate with in here.

无论哪种情况，我们实际上都非常接近列表的顶部。
And in either case we're actually pretty close to the top of the list.

因此，我们将寻找适用于 Alan Bradley F1 协议的 AB k e 驱动程序，并且我们将使用 SLC 500 类型的通信方案。
So we're going to be looking for this AB k e driver that's for Alan Bradley the F1 protocol and we're going to be using an SLC 500 kind of communications scheme.

因此，让我们拿起蝙蝠并单击选择，当我们这样做时，它会出现在底部的驱动程序中，我们可以放置多个驱动程序。
So let's take a bat and click select and when we do that appears into our drivers down here on the bottom could we put multiple drivers.

哦，是的，我们可以放置各种不同的驱动程序，并同时与各种不同的设备进行通信。
Oh yeah we can put all kinds of different drivers and actually communicate with all kinds of different devices at the same time.

因为请记住，这不是简单的 HDMI 软件。
Because remember this isn't simple HDMI software.

这是 HDMI 滑板软件。
This is HDMI skater software.

它几乎可以做所有事情。
It can do pretty much everything.

让我们接受并点击“确定”。
Let's take that and hit OK.

现在在驱动程序下，您可以看到我们有一个新文件夹，上面写着 BKC。
And now under drivers you can see we've got this new folder that says a BKC.

所以我要右键单击 BKB 并进行设置。
So I'm going to right click on BKB and take settings.

这是我们要配置通信的地方。
And here is where we're going to configure our communications.

首先我们的通讯。
First of all our comm.

请记住，我们将使用我们的 com 零平静在 COM 端口之间进行通信，在这种情况下，我们的年龄和我的年龄需要设置为收入，就像一个简单的构建者一样，我们总是希望这样的设置来。
Remember we're going to be using our com zero calm to communicate between COM ports in this case our age and mine needs to be set up on income for just like an easy builder we always want that set up on come for.

然后进行错误检查。
And then for our error check.

让我们确保我们配置为 C R C PC 系列。
Let's make sure that we are configured for C R C P C family.

我们希望确保 SLC 为 500。
We want to make sure that that is SLC five hundred.

因此，只要此时您的窗口看起来与我的完全一样，您就可以进行通信了。
So as long as your window looks exactly like mine at this point you are ready for communications.

那么让我们点击确定吧。
So let's hit OK on that.

此时这很简单。
And that was simple at this point.

我们的项目已完全配置为与在模拟上运行的项目进行通信，并且当我们将数据高速公路设置为零时，我们已经设置了模拟，实际上超出了，当我们到达在屏幕。
Our project is fully configured to communicate with our project running on emulate and we've already set up emulate when we set up the data highway zero to actually beyond come to and see our See when we get to the point of dropping some controls on the screen.

他们应该能够与我们的程序对话，我们将看看是否会发生这种情况。
They should be able to talk to our program and we'll see if that happens.

现在让我们结束本次讲座。
For now let's wrap up this lecture.

那是简短而甜蜜而简单的。
That was short sweet and simple.

他们使该软件中的通信变得非常非常容易。
They make communications very very easy in this software.

见下一讲。
See in the next lecture.

干杯
Cheers